Instalacion del maniqui

Instalacion del maniqui

Display Mannequins assembly instructions

A – LEGS SET UP

Locate the leg into the leg fitting and twist the window mannequin into the correct position. Make this step easier by putting the legs upside down. Hold the leg to fit by its calf and twist. The fitting is spring loaded, so please take care when twisting it into place. You should now not need to

remove this leg in the future even to dress jeans as it is sprung to flex for convenience.

B - DISPLAY MANNEQUIN INSTALLATION ON BASE

1 • Foot fitting

Screw in the spike onto the base plate. Make sure it is secured.

2 • Ankle fitting

Locate the spike into the extra spigot. Screw in on the base plate and make

sure it is secured. Put the legs on the spike. Adjust on base.

Put the spike into the hole located at the calf. Adjust on base

3 • OPTION ONLY : Bendable spike

The angle on the spike can be adjusted manually by pulling/pushing the spike.

For this, please stand on base before adjusting the spigot and spike on the base

to prevent glass breakage.

C – WINDOW MANNEQUIN ASSEMB LY 

1 • Locate the upper body on the central spigot. The off centre nipple will hold

the 2 parts securely together.

2 • ILocate hands to arms by twisting into the correct position, and then put arms

to the bust.

YOUR MANNEQUIN IS SET UP AND READY FOR USE

Your window mannequin can be cleaned with a damp cloth. Scratches can be removed

with a white rubber eraser. The gloves supplied will help you to keep your display mannequin

clean Small chips can be fixed with the touch up paint supplied.

(not supplied for chrome or gloss finish

Lamentamos las molestias.

Realice una nueva búsqueda sobre su interés